Advantages of composite construction


Composite construction basically refers to the use of steel and concrete formed so that the resulting component behaves as a single element. The objective of the composite construction is to use the best properties of the different materials and offer a performance that is greater than individual components had been used together but not unified. In the case of steel and concrete, the best properties would be the tensile strength of the steel and the compression capacity of the concrete. The composite construction dominates the multi-storey non-residential construction sector. This has been the case for more than twenty years. Its success is due to the resistance and rigidity that can be achieved with the minimum use of materials. The reason why the composite construction is often so good can be expressed in a simple way, concrete is good at compression and steel is good at tension. By structurally joining the two materials, these strengths can be used to obtain a highly efficient and light weight.

Composite construction is an effective method of construction and delivers good performance. The methodology for designing composite structures has been researched in great detail. Composite construction is a very popular method of construction around the world.



Advantages of Composite Construction


1: The significant feature of a composite system is a stiffer and stronger structure that can be obtained from the same beam and slab acting no compositely. In this sort of construction smaller and shallower beams may be used.

2: The benefits of composite construction include speed of construction performance and value. Steel framing for a structure can be erected quickly and the pre-fabricated Read more......

Comments

Post a Comment

Popular posts from this blog

Reinforced Cement Concrete

Image
The acronym RCC stands for Reinforced Cement Concrete. An RCC framed structure is essentially a set of slabs, beams, columns and foundations which are interconnected together to form a stable configuration. The transfer of load in such structure takes place from the slabs to the beams, and from the beams to the columns and finally to the foundation which in turn transfers it to the underlying soil.  The floor area of ​​a RCC framed structure is 10 to 12 percent more than that of a load bearing structure because of the load bearing walls that have a relatively large base area compared with footings for a framed structure. Therefore, there is a real economy in case of an RCC framed structure especially where the cost of the land is very high. Most importantly, in case of RCC framed structures, the internal planning of the rooms, bathrooms, W/Cs etc. can be altered by changing the position of the non-loaded partition walls, thus providing greater flexibility in planning and subs
Read more

What is pile foundation?

Image
A concrete pile is basically a long cylinder in reinforced concrete that is buried in the ground to act as a stable support for the structures that will be built on top of a platform supported by one or more of said cylinders. The set is known as foundation piles or deep foundations. Pile foundations are mainly required for tall buildings as the design loads are too large to be supported on spread footings. Sometimes, when soil has low SBC or the soil is clayey, a raft or a pile foundation may be the solution.   Piles can by classified in 3 ways: The way in which the load is transferred on to the soil. Method of Installation. Material of construction.   Classification of Piles based on load transfer   Point Bearing Piles If bedrock or hard strata is present within reasonable depth, piles can be extended to rest on the bedrock or penetrate required depth into the hard strata. In this case, the ultimate bearing capacity of the pile depends entirely on the und
Read more

What exactly infrastructure engineers do?

Image
Civil infrastructure engineers are required to work with various types of client including private individuals, architects, land developers, master planners and housing developers from one off projects to more regular ongoing assistance and support. They are experienced in developments across sectors including residential, housing, commercial and industrial. Civil infrastructure systems involve design, analysis, and management of infrastructure supporting activities including electric power, oil and gas, water and waste water, communications, transportation and collections of buildings for urban and rural communities. These networks deliver essential services, provide shelter, and support social interactions and economic development. In one line,  they are the lifeline of any society.  Civil infrastructure systems builds on and extends traditional civil engineering areas. Rather than focus on individual structural components or structures, it emphasizes on how different s
Read more