What does a Structural Engineers do?


Structural engineering


It is a sub division of civil engineering wherever the structural engineers are trained to compute the strength, solidity and rigidity of buildings. Structural engineers develop designs/styles and integrate their design with that of alternative designers, and supervise the construction of projects on site. Structural engineers utilizes a number of relatively simple structural elements to build complex structural systems. Structural engineers are responsible for creating artistic and economical use of funds, structural components and materials to attain these goals.

What structural engineers do ?


Structural engineers do includes planning structures like buildings, bridges and many more. They work basically as consultants to architects or design build contractors. The design builder comes up with a building layout, then it is the structural engineer's responsibility to calculate the masses (such as snow, wind and earthquake forces), match the structure to the design, and decide on what structural systems to use. The structural systems embrace steel, concrete, masonry, wood and alternative materials from that the engineer selects beams, columns, and alternative members that form up the building support.
Structural engineers typically committed with the plan of new buildings, they're generally concerned within the destruction of a structure, either permanently or so as to repair it. They additionally examine structures after construction to make sure that they're properly constructed. As the main work of structural engineers is closely tied to public safety, they have to be registered with the state in which they demonstrate their talents.
Basically speaking, a designer need to have minimum bachelor's degree in engineering(four years). After getting these credentials the engineer should pass a licensing test and after passing the test the engineer can then practice as a registered engineer.

Comments

Post a Comment

Popular posts from this blog

Reinforced Cement Concrete

Image
The acronym RCC stands for Reinforced Cement Concrete. An RCC framed structure is essentially a set of slabs, beams, columns and foundations which are interconnected together to form a stable configuration. The transfer of load in such structure takes place from the slabs to the beams, and from the beams to the columns and finally to the foundation which in turn transfers it to the underlying soil.  The floor area of ​​a RCC framed structure is 10 to 12 percent more than that of a load bearing structure because of the load bearing walls that have a relatively large base area compared with footings for a framed structure. Therefore, there is a real economy in case of an RCC framed structure especially where the cost of the land is very high. Most importantly, in case of RCC framed structures, the internal planning of the rooms, bathrooms, W/Cs etc. can be altered by changing the position of the non-loaded partition walls, thus providing greater flexibility in planning and subs
Read more

What is pile foundation?

Image
A concrete pile is basically a long cylinder in reinforced concrete that is buried in the ground to act as a stable support for the structures that will be built on top of a platform supported by one or more of said cylinders. The set is known as foundation piles or deep foundations. Pile foundations are mainly required for tall buildings as the design loads are too large to be supported on spread footings. Sometimes, when soil has low SBC or the soil is clayey, a raft or a pile foundation may be the solution.   Piles can by classified in 3 ways: The way in which the load is transferred on to the soil. Method of Installation. Material of construction.   Classification of Piles based on load transfer   Point Bearing Piles If bedrock or hard strata is present within reasonable depth, piles can be extended to rest on the bedrock or penetrate required depth into the hard strata. In this case, the ultimate bearing capacity of the pile depends entirely on the und
Read more

What exactly infrastructure engineers do?

Image
Civil infrastructure engineers are required to work with various types of client including private individuals, architects, land developers, master planners and housing developers from one off projects to more regular ongoing assistance and support. They are experienced in developments across sectors including residential, housing, commercial and industrial. Civil infrastructure systems involve design, analysis, and management of infrastructure supporting activities including electric power, oil and gas, water and waste water, communications, transportation and collections of buildings for urban and rural communities. These networks deliver essential services, provide shelter, and support social interactions and economic development. In one line,  they are the lifeline of any society.  Civil infrastructure systems builds on and extends traditional civil engineering areas. Rather than focus on individual structural components or structures, it emphasizes on how different s
Read more